Texas-instruments TPS40051 User Manual

Browse online or download User Manual for Hardware Texas-instruments TPS40051. Texas Instruments TPS40051 User Manual

  • Download
  • Add to my manuals
  • Print

Summary of Contents

Page 1 - User’s Guide

User’s Guide1TPS40051-Based Design Converts12-V Bus to 1.8 V at 15 A (SLUP195)User’s Guide

Page 2

SLUU161 – April, 200310TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)5 Test SetupFigure 2 illustrates the basic test setup needed

Page 3

SLUU161 – April, 200311 TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)6 Test Results / Performance Data6.1 Efficiency and Power Lo

Page 4 - 1.8 V at 15 A (SLUP195)

SLUU161 – April, 200312TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)6.3 Output Ripple and Transient ResponseFigure 6 shows the ty

Page 5 - 3 Schematic

SLUU161 – April, 200313 TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)Figure 9. Top Side CopperFigure 10. Internal Layer 1 Coppe

Page 6 - 4 Component Selection

SLUU161 – April, 200314TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)Figure 11. Internal Layer 2 CopperFigure 12. Bottom Layer C

Page 7 - 4.5 Input capacitor selection

SLUU161 – April, 200315 TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)8 List of MaterialsTable 1 lists the parts values of the eva

Page 8 - 4.7 MOSFET selection

SLUU161 – April, 200316TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)9 References1. Data Sheet, TPS40051 Wide-Input Synchronous Bu

Page 9 - 4.10 Compensation Components

IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvemen

Page 10 - 5 Test Setup

2EVM IMPORTANT NOTICETexas Instruments (TI) provides the enclosed product(s) under the following conditions:This evaluation kit being sold by TI is in

Page 11 - 6.2 Closed Loop Performance

3 DYNAMIC WARNINGS AND RESTRICTIONSIt is important to operate this EVM within the input voltage range of 0 VDC to 14 VDC.Exceeding the specified input

Page 12

SLUU161 – April, 20034TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)TPS40051-Based Design Converts 12-V Bus to1.8 V at 15 A (SLUP1

Page 13 - Figure 9. Top Side Copper

SLUU161 – April, 20035 TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)3 Schematic++Figure 1. TPS40051EVM–001 (SLUP195) Schematic

Page 14 - SLUU161 – April, 2003

SLUU161 – April, 20036TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)4 Component Selection4.1 TPS40051 Device SelectionThe TPS4005x

Page 15 - 8 List of Materials

SLUU161 – April, 20037 TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)4.3 UVLO CircuitryThe user programmable UVLO built into the T

Page 16 - 9 References

SLUU161 – April, 20038TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)4.6 Output Capacitor SelectionSelection of the output capacito

Page 17

SLUU161 – April, 20039 TPS40051-Based Design Converts 12-V Bus to 1.8 V at 15 A (SLUP195)4.8 Short Circuit ProtectionThe TPS40051 implements short cir

Comments to this Manuals

No comments